| |
|
|
| What
it does.
VTU Wireless is a high-performance wireless access point providing
10 / 100 Mbit/s Ethernet support. |
 |
|
How it works.
The VTU Wireless Access Point is the wireless access point
for the 802.11a/b compliant 54/11Mbit/s Wireless Solution.
The Wireless Access Point extends the range of your cabled
Ethernet network, providing easy network access to mobile
users and difficult to wire locations. The unique architecture
features dual PC Card slots. Wireless Access Point also provides
10/100Mbit/s Ethernet support.
|
 |
Benefits of the technology
Doubles your network capacity
The use of two Wireless Network Interface Cards allows each to operate
on a different frequency channel.
Creates a wireless backbone
In large open areas like warehouses and retail stores, the architecture
supports a wireless-to-wireless bridging feature. This allows you
to build an extension to your wireless network without expanding
the wired backbone.
Lowers your network management cost
Windows based SNMP-compliant Wireless Manager makes it easy to configure
your Wireless Access Point. You can also use this software to centrally
manage, control, and remotely monitor your enterprise-wide Wireless
network.
Access Point: Protects your investment
Dual PC Card slots provide flexibility in the use of wireless radios.
An upgrade to newer radio technology can be established very easily
by exchanging the Wireless PC Card, which protects your investment
in the Wireless infrastructure.
Features
• Support
both 802.11 a and b operating modes
• Extended
range with optional antennas
• Range
of up to 550 meters
• WEP
and RC4 encryption
• Software
upgradeable to new features
• VLAN
support
• Enhanced
roaming support
• Allows
LAN access in places that are not reachable/suitable for normal
network cabling
• One
network manager to maintain/support your entire wireless network
• Roaming
capabilities
• Very
fast return on investment
Technical specifications
• Dual
PC Card slot architecture
• Wireless-to-Wireless
Bridging
Protocols supported
• 10/100
Mb Ethernet Support
• IEEE
802.11b (Wi-Fi) compliant 2.4Gbit/s/11Mbit/s
• IEEE
802.11a compliant 5Gbit/s/54Mbit/s
• Spanning
Tree Algorithm
• IEEE
802.1D Transparent Bridging
• Selective
protocol filtering
• Access
Control Table and radio based authentication
• DHCP
and BOOTP
• Multi-channel
support
• Roaming
Support
• RC4
based encryption support
• 802.11
MIB compliant
• WEP
supported
Physical interfaces
• 100Base-T
(RJ 45 Connector)
• 2
Slots for Wireless PC Cards RS-232 Physical features
• Dimensions
50 mm x 185 mm x 261 mm (2.0 in. x 7.3 in. x 10.2 in.)
• Weight
1.75 kg (3.86 lb.)
• Operating
temperature 0°C to + 40° C (20% to 80% relative humidity)
Power consumption
• Power
Supply Integrated Module
• Auto-sensing
100/240 VAC 50/60 Hz/0.2 A
|
|
